23 days later

You could consider ordering 798-MDF710S254DSA56 and just offset the row/remove 2x pins so it still sits flat. Or cut it down, but that might look a bit messy!

Elsewise seems to be available at the end of October.

    Dremel for the win 🙂 - as Andy wrote, the good thing with headers is, that you can always shorten them.
    Many greets,
    Peter

      6 days later

      thanks! that are good news! i will go for the shortening thing.

        2 months later

        Hi all! after taking a little detour and using another sequencer for a while I’ve decided on the midiphy Seq v4+ and am very excited to get stuck into the build.

        Was looking at the BOM and it looks like I can source everything except the 6 x BC817-25LT1G. Any suggestions on an possible alternative?

          Hello, a Mouser parametric search gives the following components with similar specs:

          Mouser Part Number		Mfr Part Number		Mfr.
241-BC817-25R100001		BC817-25_R1_00001	Panjit
863-BCW65ALT1G			BCW65ALT1G		onsemi
863-BCW65CLT1G			BCW65CLT1G		onsemi
863-BCW66GLT1G			BCW66GLT1G		onsemi
621-BC817-25Q-7-F		BC817-25Q-7-F		Diodes Incorporated
522-FMMT455TA			FMMT455TA		Diodes Incorporated
621-BC817-40W-7			BC817-40W-7		Diodes Incorporated
621-BC817-40Q-7-F		BC817-40Q-7-F		Diodes Incorporated
241-BC81716AUR2000A1		BC817-16-AU_R2_000A1	Panjit
241-BC81740AUR1000A1		BC817-40-AU_R1_000A1	Panjit
750-BC817-25-G			BC817-25-G		Comchip Technology
241-BC817-40R100001		BC817-40_R1_00001	Panjit
833-BC817-40HE3-TP		BC817-40HE3-TP		Micro Commercial Components (MCC)
821-BC817-25RF			BC817-25 RF		Taiwan Semiconductor

          Of those, the most familiar manufacturer is OnSemi or Diodes Inc, so I would suggest to try one of those.

          Have fun!
          Andy

          • Drox replied to this.
            a month later

            I think 595-MC3487NE4 also works at Mouser, no?

            • Drox replied to this.
              2 months later

              Is there a difference between 517-N2516-6002RB and 517-N2516-517-D2516-6V0C-AR-WE 16pin sockets? Both are one piece on the bom list.

                18 days later

                For my MatriX: Mouser announced the Bourns Slide Potentiometers (PTL30-15R0-103B1) not before August 2022. As well as the red 8-pin sockets (7-215079-8) are not available.
                Has someone an idea where I could get them from, instead?

                  Thanks Andy, found and just ordered. Was not aware of Digikey.
                  BR
                  Robert

                  8 days later

                  Looks good! The difference would seem to be that the in-stock one is “bulk” packaged (i.e., loose), but as there is I think only one per build there shouldn’t be any issue with handling.

                    21 days later

                    Hello.
                    DIN8 socket what is noted in BOM is out of stock.
                    Same manufacturer has similar one, but 3 pins don’t match. That’s a bummer.
                    SDF-80J is in BOM
                    SDS-80J is with same footprint, but 3 pins are swapped

                    If I use SDS on all my devices then it should be OK, but if I forget it and use SDF in future and connect BLM then what do I blow up?