R5 different in assembly video for Seq V4+

ee99dc09c451c151

Hello,

I’m currently assembling my Seq V4+.

In the first assembly video, around 25.53, it shows the soldering of two 10k THT resistors, r4 and r5.

Unfortunately, on my board there is no THT for r5 as in the video, but on the other side there seems to be a place for SMT r5.

Do I just need to find a 10k SMT resistor and solder it there?

All the best,

Jeremy

17703227d9536da1

Hi Jeremy,

I think that is on the USB board, correct? If so, yes, the 1206 part was exchanged here to make room for the polyfuse. This should be reflected in the BOM and if I did it right, you probably have both parts if you ordered the Mouser BOM without changes.

Have fun!
Andy