First Post :) Kit Availability

23d16c90622639c9

Here is a list of replacement components for the SEQ V4+ based on the current (early May 2021) Mouser BOM supplied by Midiphy. The following BOM components below are not available from Mouser currentlyx, so i have replaced them against a similar type (but other Manufacturer) or better quality (Automotive Grade, Gold contacts etc), or color (blue for the CV connector instead of black).
The only part not available at Mouser at all is the Bourns trimmer, which is available via Farnell though.
Sorry for the messed up table, i’m not sure how to post a list in fixed font (code).

Amount _ Original Type _ Replacement
2x 3306F-1-103 _ Farnell 1689844
49x MF1/4DCT52R1001F _ Mouser 660-MS1/4DCT52R1001
16x BAT54HMFHT116 _ Mouser 771-BAT54235
19x CR1206-JW-103ELF _ Mouser 71-CRCW1206J-10K-E3
16x BC818-40LT1G _ Mouser 863-BC817-40LT1G
7x SN74HC165DR _ Mouser 595-SN74HC165QDRQ1
1x SJ1-3535NG _ Mouser 490-SJ1-3535NG-BE
14x 89110-0101 _ Mouser 517-8910
7x 89116-0101 _ Mouser 517-8916

17703227d9536da1

Thanks for the list! I get a lot of questions on parts replacements, so it would be great to share something publicly, maybe even in its own thread.

If by the Bourns trimmer you mean 652-3306F-1-103, well those are not needed for the SEQ as the OLED does not use a backlight or traditional contrast control.

23d16c90622639c9

How about creating a sticky in the SEQ v4+ subform with an updated BOM as often as required.
The components market situation right now is quite problematic as you know even with the open BOM stuff and “Hühnerfutter” there are quite some shortages right now which often requires to go for a broker instead of a line card supplier.

23d16c90622639c9

For ease of use, here is the full updated BOM for copypaste at Mouser. SD Card and Bourns trimmer have been removed.

512-1N4148TR|89
798-MDF710S254DSA55|6
80-C1206C104M5R|20
771-BAT54235|16
595-SN74HC165QDRQ1|7
595-SN74HC595DR|10
517-929700-01-36-RK|2
517-30310-6002|17
660-MS1/4DCT52R1001|49
71-CRCW1206J-10K-E3|19
660-MFS1/4DCT52R47R0|32
652-4610X-1LF-10K|6
652-CR1206-JW-102ELF|19
642-3FTH9|34
642-1S11-19.0|34
863-BC817-40LT1G|16
863-BC808-25LT1G|16
757-TBD62381AFWGEHZ|1
517-30308-6002HB|1
517-N2516-6002RB|4
604-WP154A4SUREQBFZW|1
660-MF1/4DCT52R4701F|5
652-4816P-1LF-10K|2
538-22-23-2031|2
517-929836-01-36-RK|1
4816P-T02-103LF|1
534-7695|6
595-SN74HCT125DR|2
571-1-215570-0|2
649-93992-436HLF|1
650-NANOSMDC075F-2|1
652-CR1206JW-220ELF|2
652-CR1206JW-331ELF|1
660-MF1/4DCT52R1002F|3
660-MF1/4DCT52R2201F|2
652-CR1206JW-222ELF|2
71-CRCW1206560RJNEB|1
660-MF1/4DCT52R2203F|1
660-MF1/4DCT52R3300F|1
490-SJ1-3535NG-BE|1
611-1101M2S4AV2BE2|1
821-BC337-40-A1|2
771-PRTR5V0U2X-T/R|1
538-67068-7041|1
538-89485-8000|1
594-K104K15X7RF5TL2|9
517-D2516-6V0C-AR-WE|1
SD-RSMT-2-MQ|1
642-MJTP1117|1
806-KCDX-5S-S2|10
490-SDF-80J|2
512-6N138M|4
517-4808-3004-CP|4
660-MF1/4DCT52R2200F|20
K330J15C0GF5TL2|8
818-AG11D-ESL-LF|4
815-ABL-20-B1U|4
636-182-025-213R561|2
595-MC3487N|2
571-2-1571552-4|4
660-MF1/4DCT52R1000F|12
595-MC3486N|2
571-1487595-1|1
517-8910|14
517-8916|7
517-3365/10FT|6
517-3365/16FT|6
517-929838-04-36-RK|1
517-89124-0101|1
517-89108-0101|1
517-3365/26FT|4

0fc5608d995b44ff

@SCR SEQ v4+ Essential kits are finally available again! 🙂

Best regards and have a good weekend!
Peter

74fa315c39aa3f59

Hi everyone! And Hi Hawkeye! (it’s been years since we last talked on the Midibox Forum… (maybe 2015?))

I’ve been following the midiphy project since it started, and I received the full kit nearly a year ago. I finally have a little time to dive into that awesome project!

But I first have to get the additional components from Mouser, of course…

I have the Enhanced LH essential kit : the BOM is still the list SCR provided in May 2021? Or is there an updated version? (I’ve been looking around, couldn’t find it, it might be a good idea to put it in the front page on the Midiphy Seq v4+ page for slow brains like me! ;-) )

Thanks in advance!

Cheers,

Gael - tupinamba

0fc5608d995b44ff

@tupinamba Hi Gael, great to talk with you again!

Welcome to the forums over here and nice that you have the time to start building the kit!

There was no parts or BOM update since last year, you’ll get the current BOM always on the product page, if you scroll down a bit:

https://www.midiphy.com/en/shop-details/0/47/seq-v4-enhanced-lh-essential-kit#bom

Below the BOM listing is also a direct copy&paste list that allows direct importing of the parts into your mouser cart. The BOM is always the “master reference” - in the build videos there is also an Errata section in the Youtube text description - this corrects mistakes i made when filming the build a few years back 🙂.

Have lots of joy building and using your new SEQ v4+ - next upgrade is the MatriX then 🙂.

Best regards,
Peter

74fa315c39aa3f59

Thank you Peter!

Your build videos are simply AMAZING!
And yes, I know that the MatriX is the next step… :-)

Cheers,

Gael

74fa315c39aa3f59

Hi Peter,
Would you have an alternate for this 3M Header as it is obsolete and not available on Mouser?…
[https://www.mouser.fr/ProductDetail/?qs=NQMal8mNAAuQ9xQty1ZZjA%3D%3D]
I’m just about to order… ;-)
Thank you !

0fc5608d995b44ff

tupinamba Bonsoir Gael,

Sure 🙂 - check out Mouser # 710-61200823021
Link:
https://www.mouser.com/ProductDetail/Wurth-Elektronik/61200823021?qs=PhR8RmCirEZvQm5v3EiYrA%3D%3D

I think this should work just fine instead, if it does, could you give us feedback so we could replace it in the BOM?

Thanks a lot and have a good evening!
Best regards,
Peter

74fa315c39aa3f59

Hi Peter,
Thank you!
And what about the TBD62381?
Mouser won’t have any until next September… :-/
All the best,
Gael

17703227d9536da1

tupinamba

As another option, you could try
757-TBD62183AFWGEHZ

This has the same logic and footprint. The current per channel is lower, but probably enough for this matrix?

Or you could “dead bug” a TBD62381APG (DIP package).

Another alternative is 757-TBD62083AFGEL or 757-TBD62083AFWGEL , still out of stock for a few months though.

17703227d9536da1

Only 4-5 months, not bad!

You could try here? Let us know if you find a good source that we can recommend

https://www.arrow.com/en/products/tbd62781afwgel/toshiba?region=nac&utm_term=TBD62781AFWG,EL&utm_source=digipart&utm_medium=aggregator&utm_campaign=digipart_2018&utm_content=inv_listing

0fc5608d995b44ff

@latigid on thanks Andy, great find with the TBD62183 as an alternative for the TBD62381!
@tupinamba would you let us know how it works?

Best regards and have a good weekend!
Peter

74fa315c39aa3f59

Hey!
Thank you so much Andy and Peter!
I’m trying to add the TBD62183 to my Mouser order (which is due to ship today so we’ll see how this goes…)
I’ve tried to get a TBD62381 from Alibaba, still waiting for an answer from the supplier.
I’ll tell you how all this goes!
Cheers,
Gael